Past 30 Days: 0. All Time: 598. Reset your iPod by holding the Menu and Select buttons simultaneously until the Apple logo appears. If that still doesn't work, you might want to try following the Apple iPod Troubleshooting Assistant. - iPod Nano 5th Generation.
To do it, simply hold the Home and the power buttons at the same time. Let go of both buttons when the Apple logo appears and the device should restart normally. 2. Use Recovery Mode. Step 1: Turn off the device and let it stay that way for a few minutes. Then connect the iPod to the computer using USB cables. Plug it into the computer, launch iTunes if it doesn't launch automatically. Click the device icon in the top bar, choose the iPod if you see multiple devices listed. Click Restore. Follow the onscreen instructions. Fix the jack for the headphones and the hold switch, both in the same area of an ipod fix. You need a screwdriver, pry tool, steady hands and patience. Fix headphone and hold switch on 5th gen iPod video. Click through to watch this video on ipodhowtovideo.com. Restoring an iPod Touch Using the Settings Menu. Download Article. 1. Connect your iPod to a power source. This will help prevent your iPod from shutting down unexpectedly during the restoration process. 2. Tap on “Settings,” then tap on “General.”. 3. Tap on “Reset,” then tap on “Erase All Content and Settings.”.This is for the Mac, there's probably a similar method for a PC. Connect your iPod nano to your Mac. Open Disk Utility. Select "Apple iPod Media" from the sidebar. Click the Erase button. Leave all of the fields as they are, and click "Erase" again. After it's done, disconnect the iPod (ignore the eject warning).
Download Article. 1. Before placing the iPod into disk mode, you should verify that it is charged. 2. Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.) 3. Press and hold the Menu and Select buttons for at least 6 seconds until the Apple logo appears. 4. Download Article. 1. Connect your iPod to your computer. If your iPod is disabled, the only way to unlock it is to completely erase and reset it. If you have a backup, you'll be able to restore it, otherwise you'll lose all of your data. There is no way to unlock a disabled iPod unless you use the correct passcode or you erase it. IKmPbt4.